WW600/60
FLOW @ BEP
2650 usgpm
HEAD @ BEP
198 ‘
SPEED @ BEP
EFFICIENCY @ BEP
FEATURES & BENEFITS
- Auto Start/Stop
- Telemetry
- Fuel Active System
- Solar Panel Charger
- LED Service Lights
- RIGSAFE Shutdown Valve
- Indefinite Dry-Run
- Cycloseal – advanced mechanical seal
- ATEX spark arrestor*
AT A GLANCE
| Suction Size | 200 mm | 8 " |
| Discharge Size | 200 mm | 8 " |
| Solids Handling | 76 mm (min) | 3 " (min) |
| Max Flow | 670 m³/hr | 2950 usgpm |
| Max Head | 87 metres | 285 ' |
| Max Speed | 1800 rpm | 1800 rpm |
| Net Weight | 3750 kgs | 8265 lbs |
| L × W × H | 3.70 × 1.40 × 2.05 metres | 146 × 55 × 80 " |
BEST SUITED FOR THESE MARKETS:
WATER MANAGEMENT
INDUSTRIAL
PUMP
HIRE
CHOOSE DIESEL OR ELECTRIC
DIESEL ENGINE SPECS
| Fuel Tank Size | 450 ltrs (119 usg) |
| Fuel Burn/hr @ BEP | 41 litres/hr (10.85 usgph) |
| Rated Power @ BEP | 137 kW (184 hp) |
| Model | Deutz TCD6.1L4 |
| Emissions | EU Stage V |
| Max Power | 180 kW (241 hp) |
ELECTRIC MOTOR SPECS
| Model | WEG / ABB 415V 3 phase 50Hz |
| Standard | IEC3 |
| Rated Power | 185 kW (248 hp) |
| Enclosure | TEFC |
| Nominal Speed | 1500 rpm |
| Frame | 315 |
PUMP SPECIFICATION
Model | CRP150NNW419 |
Priming System | Type: Cornell liquid tolerant diaphragm vacuum pump Air Removal Capability: 50 cfm Priming Chamber: Cornell optimised priming chamber design and valve linkage for maximum reliability and zero carryover Discharge Check Valve: Patented Cornell Non return valve with optional 90 degree discharge and heavy duty flapper Run Dry: Indefinite capability |
Impeller | Type: Two Vane, WasteWarrior unique cutting impeller design for ragging conditions Size: 418 mm (16.50 ″) |
Volute | Heavy duty GG30 Gray Iron with 125# flanges |
Mechanical Seal | Tungsten Carbide v Silicon Carbide |
Bearing & Shaft | Heavy-duty bearing housing with dual angular contact bearings on drive end and heavy duty shaft |
PERFORMANCE CURVE
