DE750/50
FLOW @ BEP
3300 usgpm
HEAD @ BEP
82 ‘
SPEED @ BEP
EFFICIENCY @ BEP
FEATURES & BENEFITS
- Auto Start/Stop
- Telemetry
- Fuel Active System
- Solar Panel Charger
- LED Service Lights
- RIGSAFE Shutdown Valve
- Indefinite Dry-Run
- Cycloseal – advanced mechanical seal
- ATEX spark arrestor*
AT A GLANCE
| Suction Size | 250 mm | 10 " |
| Discharge Size | 200 mm | 8 " |
| Solids Handling | 86 mm (min) | 3.40 " (min) |
| Max Flow | 860 m³/hr | 3790 usgpm |
| Max Head | 90 metres | 295 ' |
| Max Speed | 1800 rpm | 1800 rpm |
| Net Weight | 3750 kgs | 8265 lbs |
| L × W × H | 3.70 × 1.40 × 2.05 metres | 146 × 55 × 80 ″ |
BEST SUITED FOR THESE MARKETS:
OIL & GAS
CONSTRUCTION & TUNNELLING
INDUSTRIAL
Mining, Quarry & Aggregates
WATER MANAGEMENT
PUMP
HIRE
CHOOSE DIESEL OR ELECTRIC
DIESEL ENGINE SPECS
| Fuel Tank Size | 450 ltrs (119 usg) |
| Fuel Burn/hr @ BEP | 44 litres/hr (11.60 usgph) |
| Rated Power @ BEP | 125 kW (168 hp) |
| Model | Deutz TCD6.1L4 |
| Emissions | EU Stage V |
| Max Power | 180 kW (241 hp) |
ELECTRIC MOTOR SPECS
| Model | WEG / ABB 415V 3 phase 50Hz |
| Standard | IEC3 |
| Rated Power | 185 kW (248 hp) |
| Enclosure | TEFC |
| Nominal Speed | 1500 rpm |
| Frame | 315 |
PUMP SPECIFICATION
Model | CRP200NHTA410 |
Priming System | Type: Cornell liquid tolerant diaphragm vacuum pump Air Removal Capability: 50 cfm Priming Chamber: Cornell optimised priming chamber design and valve linkage for maximum reliability and zero carryover Discharge Check Valve: Patented Cornell Non return valve with optional 90 degree discharge and heavy duty flapper Run Dry: Indefinite capability |
Impeller | Type: Two Vane Enclosed Solids Handling Impeller design for large spherical solids pass through whilst providing optimal efficiency Size: 410 mm (16.14 ″) |
Volute | Heavy duty GG30 Gray Iron with 125# flanges |
Mechanical Seal | Tungsten Carbide v Silicon Carbide |
Bearing & Shaft | Heavy-duty bearing housing with dual angular contact bearings on drive end and heavy duty shaft |
PERFORMANCE CURVE
