DE250/140
FLOW @ BEP
1100 usgpm
HEAD @ BEP
140 metres
460 ‘
SPEED @ BEP
1800 rpm
EFFICIENCY @ BEP
67%
FEATURES & BENEFITS
- Auto Start/Stop
- Telemetry
- Fuel Active System
- Solar Panel Charger
- LED Service Lights
- RIGSAFE Shutdown Valve
- Indefinite Dry-Run
- Cycloseal – advanced mechanical seal
- ATEX spark arrestor*
AT A GLANCE
| Suction Size | 200 mm | 8 " |
| Discharge Size | 150 mm | 6 " |
| Solids Handling | 76 mm (min) | 3 " (min) |
| Max Flow | 330 m³/hr | 1450 usgpm |
| Max Head | 155 metres | 510 ' |
| Max Speed | 1800 rpm | 1800 rpm |
| Net Weight | 4800 kgs | 10560 lbs |
| L × W × H | 4.25 × 1.60 × 2.20 metres | 140 × 53 × 72.5 " |
BEST SUITED FOR THESE MARKETS:
OIL & GAS
CONSTRUCTION & TUNNELLING
INDUSTRIAL
Mining, Quarry & Aggregates
WATER MANAGEMENT
PUMP
HIRE
CHOOSE DIESEL OR ELECTRIC
DIESEL ENGINE SPECS
| Fuel Tank Size | 600 ltrs (158 usg) |
| Fuel Burn/hr @ BEP | 45 litres/hr (12.5 usgph) |
| Rated Power @ BEP | 155 kW (208 hp) |
| Model | TCD7.8L6 |
| Emissions | EU Stage V |
| Max Power | 245 kW (330 hp) |
ELECTRIC MOTOR SPECS
| Model | WEG / ABB 415V 3 phase 50Hz |
| Standard | IEC3 |
| Rated Power | 250 kW (335 hp) |
| Enclosure | TEFC |
| Nominal Speed | 1500 rpm |
| Frame | 355 M/L |
PUMP SPECIFICATION
Model | CRP100MX525 |
Priming System | Type: Cornell liquid tolerant diaphragm vacuum pump Air Removal Capability: 50 cfm Priming Chamber: Cornell optimised priming chamber design and valve linkage for maximum reliability and zero carryover Discharge Check Valve: Standard in-line non return valve complete with BUNA flapper Run Dry: Indefinite capability |
Impeller | Type: Four vane CA6NM Stainless steel clear liquid, high efficiency impeller with 20mm solids handling capability Size: 526 mm (20.70 ″) |
Volute | Heavy duty GGG40 Ductile Iron |
Mechanical Seal | Tungsten Carbide v Silicon Carbide |
Bearing & Shaft | Heavy-duty bearing housing with dual angular contact bearings on drive end and heavy duty shaft |
PERFORMANCE CURVE
